Skip the menu
Plumber Bullhead
Chrome kitchen faucet crusted with white scale that needs faucet repair

Faucet and Sink Repair in Bullhead City, AZ

A licensed plumber who works locally can stop a dripping faucet, fix a weak or spraying flow and repair leaks under the sink.

Find out why your faucet drips

Why faucets in Bullhead City drip and lose pressure

Faucet repair in Bullhead City is one of the most common plumbing jobs, and hard water is usually behind it. Minerals collect inside the cartridge, on the valve seats and in the aerator, so seals wear out, handles get stiff and the flow turns weak or uneven.

A dripping faucet is easy to ignore, but it wears the parts further every day and wastes water around the clock. Most drips stop once one worn part is replaced, and a plumber can usually tell which one within a few minutes.

The cabinet under the sink deserves the same attention. Supply hoses, shut off valves and drain joints all sit there, out of sight, and a small leak can ruin the cabinet base before anyone opens the door.

Leaks under the sink you may not have noticed

Open the cabinet under each sink and look with a flashlight. Warped or stained wood, a musty smell, white crust on a valve or drops hanging from a hose are all signs of a slow leak.

The usual culprits are aged braided supply hoses, angle stop valves seized by scale and slip joints on the drain trap that have worked loose. Each is a small part, but a steady drip can rot the cabinet base and spread under the floor.

A plumber swaps worn hoses and valves for new ones and resets the drain joints so they seal. That kind of faucet repair in Bullhead City homes is often done in the same visit as the faucet itself.

Learn how to spot hidden leaks
Gloved hand tightening a braided supply hose and shut off valve under a sink

Faucet problems and what usually causes them

These are the faults we hear about most when people call for faucet repair in Bullhead City.

  • Spout that keeps dripping

    The cartridge or washer inside has worn, so it cannot shut the water off completely.

  • Water leaking around the handle

    Worn O rings around the cartridge or stem let water escape whenever the faucet runs.

  • Weak or spraying flow

    Scale clogs the aerator screen or the cartridge openings and breaks up the stream.

  • Stiff or loose handle

    Mineral buildup grips the cartridge, or the set screw holding the handle has worked loose.

  • Hot and cold mixing badly

    A worn or scaled cartridge in a single handle faucet stops blending the water evenly.

  • Wet counter around the base

    A failed seal under the faucet body or a loose mounting nut lets water run onto the counter or into the cabinet.

Sink cabinet filling with water?

Close the small valves under the sink, or the main valve if they will not turn, and call us.

Fixing an old faucet versus fitting a new one

Most faucet repair in Bullhead City ends with new parts in the old faucet. Now and then a replacement is the smarter move, and the plumber will say so and explain why.

Repair usually makes sense when

  • The faucet is a sturdy model in good overall shape
  • Replacement cartridges and seals are still made for it
  • The body and finish are undamaged
  • Only one part, such as the cartridge or aerator, has failed

A new faucet may be the better choice when

  • Corrosion or a crack has damaged the faucet body
  • The maker has stopped producing parts for it
  • Scale has damaged the valve seat beyond cleaning
  • It has been repaired several times and keeps leaking
  • You want a different style or a pull down sprayer anyway

How faucet repair in Bullhead City is done

  1. Shut off the water

    The plumber closes the valves under the sink, opens the faucet to drain the lines and covers the drain so small parts cannot fall in.

  2. Take the faucet apart

    The handle and trim come off, then the cartridge or stem is removed and checked for wear, cracks and scale.

  3. Fit new parts

    New cartridges, washers, O rings and seats that fit the faucet go in, and scale is scrubbed off the body and aerator.

  4. Test hot and cold

    The water is turned on again and the plumber runs hot, cold and mixed, watching the spout, the handle and the fittings below for drips.

If the shut off valves under the sink are seized with scale, the plumber can replace them while the water is off, which makes the next repair much easier.

Kitchen, bathroom and outdoor faucets compared

Each kind of faucet has its own weak spots. Here is what goes wrong with each and how it is usually put right.

FaucetCommon troubleWhat the plumber usually does
Kitchen faucetLow flow at the sprayer, a drip from the spout, a leak at the baseCleans or replaces the aerator and sprayer head, fits a new cartridge, reseals the base
Bathroom faucetDrips, a stiff handle, a stopper that will not closeReplaces the cartridge or washers and adjusts or replaces the drain assembly
Tub and shower valveDrip from the spout, a handle that turns too far, water that will not get hotRebuilds or replaces the valve cartridge and checks the temperature stop
Outdoor hose bibDrips at the spout or handle, a leak inside the wall after a cold nightReplaces the washer or the whole hose bib and checks the pipe behind it
Laundry faucetLeaks at the hose connections, a valve that will not closeFits new washers or replaces the valves

Outdoor hose bibs are worth a look after the rare hard freeze, since a split pipe behind the wall may only show when you next turn on the hose.

Sinks, drains and fixtures in more detail

Open a panel for the smaller jobs that often come up alongside a faucet repair.

Pop up stoppers that will not open or close

The lever behind a bathroom faucet moves the stopper through a rod under the sink. When the rod slips or its nut loosens, the stopper stops moving. It is a small adjustment a plumber makes while checking the drain for leaks.

Leaks from the sink drain

The slip nuts on a plastic trap can loosen over time, and metal traps can corrode through. A leak here only shows when water is running, so check while the sink drains.

A loose nut can be snugged up. A cracked or rusted trap is replaced. If the drain is slow as well, see drain cleaning.

Cleaning scale from aerators and shower heads

Unscrew the aerator and leave it in a cup of white vinegar for about an hour, then scrub off the loosened scale with an old toothbrush. Shower heads clean up the same way.

If flow is still poor afterward, the scale is inside the cartridge. Our guide to hard water and your plumbing explains why this happens so often here.

Dishwasher hoses under the kitchen sink

The dishwasher drain hose and supply line both connect under the kitchen sink. A loose clamp or a cracked hose may leak only while the dishwasher runs, so check the cabinet during a cycle if the floor there is damp.

Sprayer hoses that leak under the sink

Pull down and side sprayers use a flexible hose that runs below the counter. It can crack where it bends or loosen at its connection, and it leaks only while the sprayer is in use. Have someone run the sprayer while you watch under the sink with a flashlight.

Shower heads that spray sideways

A shower head that sprays in odd directions has scale blocking some of its nozzles. Soaking it in vinegar usually clears it. If water also leaks where the head meets the arm, the washer inside needs replacing.

Answers about dripping faucets and sink leaks

Is a dripping faucet worth fixing right away?

It is worth fixing soon. A drip wastes water every hour, leaves scale stains in the sink and wears the seat further. Most drips are fixed with one new part.

Why is only one faucet weak?

When other taps run normally, the trouble is inside that faucet, most often scale in the aerator or the cartridge. Rinse the aerator first. If the flow stays weak, the cartridge needs cleaning or replacing. Weak flow at every tap points somewhere upstream, such as the main valve or the supply line.

Can the plumber find parts for my faucet?

Most faucets can be repaired this way. The plumber identifies the brand and model and fits matching cartridges and seals. If parts are no longer made, they will explain your options.

What should I do if water is pouring from under the sink?

Turn the two small valves under the sink to the right until they stop. If they are stuck, shut off the main water valve instead. Put towels down and empty the cabinet so the wood can dry. Our plumbing emergency steps explain what to do next.

Do you repair shower and tub faucets too?

Yes. Dripping tub spouts, stiff shower handles and valves that no longer mix properly are repaired by replacing the cartridge or the valve parts behind the handle. The plumber reaches them from the front once the trim plate comes off, so the tile usually stays untouched.

Can a plumber install a faucet I bought myself?

A faucet you bought yourself can usually be installed. Mention the model when you call. The plumber will check that it fits the holes in your sink or counter and replace the supply hoses at the same time if the old ones are worn. Keep the box and the paperwork handy, since the maker's instructions list the parts that come with it.

Book faucet repair in Bullhead City

Say which faucet drips or which cabinet is wet, and we will set up a visit.